Wayne CDU800 is a fully submersible sump pump. The country of origin of the pump is the USA. The pump features a powerful 1/2 HP PSC motor, and water intake occurs at the top of the base. It runs on 120 VAC mains power. The pump's switch is an automatically operated integrated vertical float type. Corrosion-resistant materials are used in the pump's construction to make it long-lasting. This pump has a maximum discharge rate of 85 GPM (5100 GPH) @ ground level and 64 GPM (3840 GPH) at 10 feet height. Wayne CDU800 is reliable for basement dewatering during rain, storm, snow melting, or any other massive water flow situations. In this story, we write a Wayne CDU800 review with all the features and technicalities. The pump is proven to outlast a million operating cycles.
Key Features of Wayne CDU800 Submersible Sump Pump
Power Efficient Motor
The motor of the CDU800 pump is oil-filled. It is a permanent split capacitor (PSC) motor that saves energy. It runs on 120 V AC voltages. The blend of the pump's engineering with an energy-efficient motor turns CDU800 into a noise-free and ultra-quiet pump. Wayne CDU800 1/2 HP is a powerful working pump with a PSC motor.
Airlock Protected Top Suction Intake
The top suction intake of the CDU800 pump is an incomparable design. Due to the unique top intake, debris buildup and clogging of the sump pit's floor are minimum degree. Also, the top suction feature rids the pump of falling in an airlock situation. Wayne cdu800 submersible pump has no scope of an airlock, so it doesn't need a weep hole.
Wayne CDU800 Submersible Sump Pump
Automatic Vertical Float Switch
The Wayne 1/2 HP sump pump cdu800 features an integrated vertical float-operated switch. The switch operates automatically. Using a solid, leak-free polypropylene material in the float simplifies the switch's automation. The pump switch's trigger level is 9 inches and deactivates at 4 inches. A float guard on the pump's switch prevents its blocking by debris and the pit's wall. It is verified to perform 1 million cycles that count at least 10X times greater than others. Wayne pumps even last longer than 1 million switching cycles.
Performance Parameters
The Wayne sump pump cdu800 design rests on two ball bearings housed in a sealed oil bath, one at the top and the other below. It ensures an almost soundless operation for the pump. The pump has a high flow rate of 5100 Gallons per Hour (GPH) and 3060 GPH at 15 feet of discharge height.
High Durability
The steel used in the construction of the housing of the CDU800 sump pump has a corrosion-resistant coating to ensure a long lifespan. The volute's construction material is rugged epoxy-coated cast iron having high durability and longevity. The construction material of the pump's fasteners is stainless steel. All the use of long-life and durable material in the pump's construction allows CDU800 to survive harsh working environments for a long time.
Highest Flow Impeller
The impeller of the Wayne cdu800 sump pump operates in centrifugal motion that maximizes water flow. The construction material of the impeller is thermoplastic or glass-reinforced polycarbonate that can resist abrasion. The high flow design and robust construction make it a highly reliable impeller.
Heavy-Duty Seals
The shaft seal design of the CDU800 Wayne pump employs premium john crane carbon/ceramic that can provide top-quality sealing for a longer duration. The seal plates are made of cast iron to make them leak-proof and resist galvanic corrosion.
High Grade Fittings
The outlet of the Wayne pump cdu800 is 1-1/2 inches NPT Discharge that complies with building codes. The pump has an 8 feet long SJTW power cord that can resist water. The power cord is easily pluggable into adjoining ground fault circuit interrupter (GFCI) outlets.
Applications
Wayne CDU800 submersible sump pump is suited for use with sump pits, sewage, well, lawn, pool cover, residential, groundwater, indoor, and multi-uses.
Warranty
The UL agency certifies the CDU800 Wayne pump. The pump carries a 3-year warranty for performance, efficiency, and reliability.
Installation
Installation of the Wayne CDU800 sump pump needs simple steps. It fits into a sump basin with 11 inches or greater diameter. The pump takes merely around 15 minutes to complete its installation.
Pros:
Cons:
Wayne CDU800 Submersible Sump Pump
VIDEO: Wayne CDU Series Sump Pump
FAQs About Wayne CDU800 Submersible Sump Pump
Q: Does the Wayne cdu800 1/2 HP operate on a 220-240 Volt single Phase line?
Yes, it will. Wayne CDU800's internal wiring is compatible with only a 120 Volt line. However, reconfiguring the pump's internal wiring will make it compatible with 220-240 Volt lines. Plugging the pump into the 220-240 Volt line without rewiring would cause the motor to burn.
Q: What are the recommended water temperature, current, and power for running the Wayne CDU800 sump pump?
- Water temperature should not be more than 110 °F.
- The pump motor operates @ 3.8 amps, 120V.
- The minimum required circuit breaker is 15 amps.
- Energy consumption is between 456 (3.8 x 120) to 1800 (15 x 120) watts.
Related Reading
- 9 Best Sump Pump for Basement 2023 – Editors Choice & Buying Guide
- Liberty Pumps SJ10 Sump Pump Water Powered – Comprehensive Guide
- Liberty Pumps LE51A 1/2 HP Submersible Sewage Pump – Practical Guide
- Zoeller M98 Sump Pump Review – Expert Guide
- Zoeller M267 Sewage Pump – Expert Opinion
- Zoeller M63 Sump Pump Review